CATEGORIES

20% OFF ALL

INSULATION PRODUCTS

Anvil - 92 Standard Beam Clamp ZP

Anvil - 92 Standard Beam Clamp ZP

Request Quote

Size Range: 3/8" and 1/2"

Material: Ductile iron, hardened steel cup point set screw and locknut.

Finish: Zinc Plated (Hot-Dip Galvanized optional)

Service: Recommended for use under roof installations with bar joist type construction, or for attachment to the top or bottom flange of structural shapes where the vertical hanger rod is required to be offset from the edge of the flange and where the thickness of joist or flange does not exceed 3/4".

Features:

  • They may be attached to horizontal flanges of structural members in either the top beam or bottom beam positions.
  • Secured in place by a cup-pointed Set Screw tightened against the flange. A Jam Nut is provided for tightening the Set Screw against the Body Casting.
  • Thru tapping of the body casting permits extended adjustment of the threaded rod.
  • Can be used with Fig 89X retaining clip for seismic applications.

Approvals: Complies with Federal Specification A-A-1192A (Type 19 & 23), WW-H-171-E (Type 23), ANSI/MSS SP-69 and MSS SP-58 (Type 19 & 23). UL, ULC Listed and FM Approved.

How to size: Size of clamp is determined by size of rod to be used.

Installation: Follow recommended set screw torque values per MSS-SP-69

Ordering: Specify rod size, figure number, name of clamp and finish

 

**Limited variety of styles & sizes for different products are stocked at ASDCO , access to non-stocked Anvil is available upon request**

Anvil- 92 Univ. C-type Clamp, Standard Throat Webpage 

 anvil international

RELATED PRODUCTS

CATEGORIES

Shop By Brand

  • logo
  • logo
  • logo
  • logo
  • logo
  • logo
  • logo
  • logo
  • logo
  • logo
  • logo
  • logo
  • logo
  • logo